|
|
 |
Third-Party BizVerify |
|
| Shenzhen Yufeng Innovate Technology Co.,Ltd. |
| Verified By : Huaxia D&B |
| Verified Date : 2011-11-22 |
|
 |
|
|
|
|
|
|
|
|
|
|
| unique pet products wholesale |
|
|
| Model No.︰ | - |
| Brand Name︰ | - |
| Country of Origin︰ | China |
| Unit Price︰ | - |
| Minimum Order︰ | - |
|
|
|
|
|
Guarantee
THE BEST OF THE BEST Multi-Function 4 in One
Will train the most stubborn of dogs!
Simple and easy to use for the dog combine Strong Static Shock , Vibration , Audio signal , Laser Pointer of training tones
|
This new generation direct transmission dog training collar actual a very effective electronic dog training system with a work distance
up to 1000 meters.
( Strong Static Shock + Vibration + Audio signal + Laser Pointer )
General description
Range up to 1000 meters of range in the free one. Signal goes also through doors and walls
Integrated solenoid - no more problems with the movement sensor
Audio signal is transferred finally again to collar! Additionally the audio signal can be likewise activated to the dog
By in collar integrated antenna is not exchangeable that collar !
stainless exploration poles knots for the forwarding of the vibration even with closer skin.
At the same time laser pointer at the transmitter (to play with the dog )
Features
1. The strong static impulse can penetrate the hair of the pet and fabric within 6mm thick. It is unnecessary to let the discharging point touch the skin of the pet. Therefore it is safe for the pet.
2. The static impulse can quickly and effectively curb the improper deeds of the pet.
3. The warning vibration will let the pet associate the vibration with static impulse. In the end, vibration will achieve the same effect as the static impulse.
4. Both the static impulse and warning functions are set with automatic stop. This is for not reprimanding the pet continuously.
5. With the vibration induction power switch in the collar receiver, it will turn on and turn off automatically to save power.
6. Water resistant Collar
Specification – Collar
Length: 43mm Height: 68mm Width: 38mm.
Weight 110 g (module + battery )
Collar length adjustable from 20 to 50cm
Power:2* 1.5V AAA battery (supplied)
Water resistant and shockproof.
Specification– Handset
Length: 120mm Height: 25mm Width: 45mm.
Weight: 110g (with battery)
Power: 2*1.5V AAA battery (supplied)
LED signal light and illumination at night
The sound function for attracting attention
Water Resistant
User’s Manual of E-304/314 Remote Control Training Collar
（Vibration and Static Impulse）
I. Preparation Before Using
1. Check that battery is installed in the remote controller then switch it on.
2. Match the remote controller and the receiver. As soon as putting batteries into the receiver, you should press vibration or shock button on the remote controller and the receiver will vibrate twice. In this way the match is done and the remote control system can operate normally.
3. If the receiver vibrates on its own without pressing any button after batteries are installed, please take out the batteries for over ten seconds and put them back and try step 2 again.
4. Checking the remote controller: Press the buttons on the remote controller one by one, the indicator light will light. If the indicator light doesn’t light or goes dim, change the batteries.
5. Checking the receiver: With the vibration induction switch in it, the receiver will enter into standby mode automatically upon shaking. The receiver will turn off automatically when it is in stillness for more than 3 to 5 minutes, so as to save power.
6. Connect the collar and the receiver. Adjust the length of the collar so that it suits the neck of your pet best. Don’t make it too tight while the discharging point of the receiver can touch the neck of the pet.
7. Press the vibration button on the remote controller and the receiver will vibrate. In about three seconds, weak static impulse will be release and it will turn stronger gradually and will be stopped in 9 seconds.
8. Press the shock button on the remote controller and the discharging point will release static impulse. The discharging state can be checked by the testing light supplied separately in the box.
9. Press the whistle button on the remote controller and a sound will be made from the receiver.
10. Press the light button on the remote controller and the LED in front of the remote controller will light.
II. Operational Instructions:
· Turn the switch of the remote controller to the “ON” position. Turn it “OFF” if you don’t use it, for fear of mistaken operation.
· Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar. Don’t make it too tight while the discharging point of the receiver can touch the neck of the pet.
· Most pets feel uncomfortable at first wearing the collar. Don’t use any of the functions before the pet has gotten used to the collar.
· With the vibration function pressed, three seconds of vibration will be given. Then static impulse will release and turn stronger gradually. This is an effective way to let the dog associate shock with vibration.
· The shock is only used to curb the improper deeds of the pet in emergency. It will stop automatically in three seconds. If you want more shock, release the button and press it again.
· The shock is used to curb the improper deeds of the pet. After each successful training, the owner will be able to let the pet know what should be done and what should not be done. Over a period of training the pet will understand what its owner likes and doesn’t like.
· We suggest you give the dog vibration by the vibration button before starting the shock. After a time of training, the dog will learn that shock will come after vibration. In this way, the vibration alone can effectively curb the improper deeds of the pet. The shock only acts as a menace that might be unnecessary for most of the time.
· Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.
· The LED can be used for illumination or giving training signals.
· Pressing the sound button, a sound will be made from the receiver for attracting the attention of the dog.
· If you don’t use this product, take the collar and receiver off the dog and place them in a place without vibration, so as to prolong the lifetime of the batteries.
· If you don’t use the collar receiver for a long time, take out the batteries.
III. How to change the batteries:
· Receiver: Take off the rubber bottom cover and you will see two batteries (model: AAA / 1.5V). Take out the batteries and install the new ones. Pay attention to the polarity of the batteries. Mount the rubber bottom cover and press it tight.
· Remote controller: The battery cell cover is at the lower part of the back of the remote controller. Open the cover by pressing it following the direction of the arrow. Take out the battery (23A, 12V) and put a new one back and then close the cover.
· The batteries used for this product are ordinary ones, which can be found in supermarkets and department stores. Please provide the correct model while buying them.
· The lifetime of the batteries vary according as how often you use the product. Since the remote controller only consumes power when you press the buttons to send signals, its battery’s lifetime is usually more than one year. The battery lifetime of the receiver depends on how frequently you use it. Therefore you should often check the batteries by watching the indicator light in the receiver.
IV. Notes for Use:
· The valid distance of remote controlling means the straight-line distance between the remote controller and the receiver without obstacles in between. If there are interference signals or signal screening around, the actual remote control distance may vary.
· This product is for pet training. Only by training can the pet understand the intention of its owner. Good effect can only be achieved after a period of training.
· Presently, this product is the most effective and safest tool for training pet. Following the correct operational instructions, you can effectively train the pet and bring it no harm.
· Though the receiver is waterproof, you cannot immerse it into the water for a long time. And you should keep the remote controller out of water.
Remote control spray and sound training collar
Ctn size:44*34*34cm
Ctn qty:36pcs/ctn
G.W.:18KG
Thank you for choosing our product!
Please read this manual carefully before using the product.
Please do read the Cautions, for fear that unwanted results arise from improper operation.
The remote control spray training collar is the product that you can use to train your dog remotely. With this product , you can let your dog receive your orders or change your dog’s bad behaviors , such as running away, tracking others ,stealing food, digging dirty earth and attacking passerby. After being trained with the product , the dog will stop the bad behaviors mentioned above at once, even if the master isn’t on the scene. It can send out the correct action orders or warning signals , even if you are not on the scene , your dog also will follow your families’ and friends’orders using this product.
Working principle:
With a wireless remote control device ( we call it remote controller for short hereinafter) and a receiver collar(we call it receiver for short hereinafter) worn around the dog’s neck , the product can effectively control the aggressive dog caused by moody or overactive, it also can convey the action orders from the master. The valid distance is about 250 meters ( the valid distance may have a little difference in different environments ),besides , the product can send out seven different orders depending on your need: three kinds of action orders (BB sounds ), three kinds of warning signals ( strong/medium/weak three different degrees of spray), and a calling order ( SOS Morse Mode ), to regulate the dog’s instant behaviors . They are controlled by seven different buttons on the remote controller separately . After being trained by the product , the dog will understand the orders from the master more quickly , knowing what behaviors are prohibited and what are rewarded.
Tips: Though the product can stop the dog’s bad behaviors quickly , you need to spend some time on training the dog by using this product correctly if you want your dog to understand your orders completely. It will cost about four to five days for the dog to get used to the product and understand your orders .
The product has no side effects like the dog feeling scared , hurt or painful.
A、Preparation before using
1.Make sure that batteries are installed in the remote controller. Press the button on the remote controller, the indicator light will light.
2. Checking the remote controller: Press the buttons on the remote controller one by one, the indicator light will light. If the indicator light doesn’t light or goes dim, change the batteries.
3. There are seven buttons on the remote controller, the three buttons on the right send out action orders , the three buttons on the left send out warning spray, and the button in the middle is the calling button .
4．There is a magnetism induction power switch in the receiver. The part with blue spot in the bottom of the remote controller is magnetic. When the blue spot part of the remote controller approach to that of the receiver, the indicator light near the blue spot part of the receiver will flash. If it keep lighting after flashing about 3 seconds, that means the power switch of the receiver is on. If it doesn’t light or goes dim, it means it is short of power., then you should charge the battery with the special charger. Let the blue spot part of the remote controller approach to that of the receiver again, the indicator light will flash, and it will go out after flashing about 3 seconds, which indicates that the power of the receiver is off.
5. Checking the receiver: press the buttons 4.5.6 on the left one by one , the spray will come out from the receiver , to stop the dog’s bad behaviors.
6. Pressing the three buttons on the right can make three different kinds of BB sounds, standing for three action orders or intentions from the master. Train the dog to let it understand and remember.
7. Press the button in the middle of the remote controller, the receiver will make a SOS Morse Mode sound , it can be used to call the dog.
8. Every time you press the buttons on the remote controller , the receiver will vibrates ,make sounds or send out spray correspondingly . You should let the pet know what should be done and what should not be done. After a number of trainings the pet will understand what you like and don’t like.
9. Adjust the length of the collar to fit the neck of the pet. The proper tightness should be that you can insert a finger in between.
10. Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.
B. Operational instructions:
a. How to change or charge the batteries:
1. The lithium battery installed in the receiver can be recharged. Please use the charger the product offers to charge it. The power indicator light of the receiver will flash when it is being charged. If the charging has been finished, it will keep lighting. It will cost 2 to 4 hours to charge every time.
2. Remote controller: The battery cover is at the lower part of the back of the remote controller. Open the cover by pressing it following the direction of the arrow. Take out the battery (Model 6LR61, 9V) and put a new one back and then close the cover.
3. The lifetime of the batteries variesaccording as how you use the product. Since the remote controller only consumes electricity when you press the buttons to send out signals, its batteries’ lifetime is usually more than one year. After the receiver is turned on, it is in a standby state. In the standby state, it only consumes small amount of electricity. If you don’t use the product, please turn off the power switch of the receiver. A frequent use of it will consume electricity quickly. Therefore you should often check whether the batteries have enough electricity by watching the indicator light. When the electricity of the batteries is not enough , please use the appropriative charger to charge the batteries..
b. How to turn on or turn off the power of the receiver
1 The electromagnetism induction power switch is installed in the receiver. Let the magnetic part of the remote controller approach to it, you can turn on or turn off the power of the receiver.
2 Approach the magnetic part of the remote controller to the electromagnetism induction switch of the receiver, then the power indicator light will flash. Keep it for three seconds,if the indicator light stop flashing, it means that the power has been turned on. If the indicator light goes out, it means that the power has been turned off.
c. How to fix and refill the gas storage bottle
1 Screw off the positioning bolt. Rotate the gas storage bottle and pull it out. Put it in the receiver, and screw up the positioning bolt.(Don’t screw too forcibly, or the thread of the bolt will be damaged.）Then the fixing of the gas storage bottle will be finished.
2 When the gas storage bottle is short of spray, please take it down and use the refill bottle to refill.
3 The refill bottle is used to refill the gas storage bottle. Please upside down the refill bottle and insert the nozzle into the refill hole of the gas storage bottle. Press firmly to fill the unit. (20 seconds)
C. Instructions:
1. At the beginning of using the product , don’t wear and take off the collar too often in four or five days , so that the dog can adapt to the product as soon as possible and won’t feel fidgety when wearing it . Be patient to help the dog get used to the product , don’t punish or treat it rudely because they don’t listen to you at first . If the dog follows you to use the product , reward it immediately and properly.
2. Once the dog can understand the order you send by the receiver , you should require your dog to make a clear and correct response to your every order. Don’t use it without purpose, or it will confuse the dog. If you have worn the receiver collar for the dog , don’t wear other types of collar.
3. Ensure the product is in the working condition at any moment , we suggest you check it everyday.
4. Before each specialized training , let the dog wear the collar for about 20 minutes to get used to it . You can train your dog with the receiver, and combine it with your body movements or other instruction methods . You can refer to other related books and materials about this . Please pay attention to the related books we published.
If you want the product to achieve the expected maximum effects, you need to make specific training to the dog.
D.Cautions:
The product isn’t a toy , don’t let the children use it , and don’t use it casually.
Before using the product, make sure your dog is healthy.
Don’t immerse it into the water. You’d better not use it in the rainy day.
Please clean the product with dry cloth.
Don’t let your dog catch or bite the product.
When the electricity of the batteries in the receiver is not enough, please charge them in time.
We strongly suggest that you should charge the batteries with the charger we offer.
Don’t disassemble the product , the damage caused by it isn’t in our warranty scope.
If the dog feels uncomfortable when wearing the collar , you can take it off for a while, and use it again when the dog calms down.
The temperature the product can be used in is between 2 and 45 centigrade. Beyond or below this temperature range will damage the product , and this kind of damage isn’t in the warranty scope.
The product can only be used on the healthy dogs. If the dog has had physical or mental problems , please turn to the professional veterinarians first.
E. Common problems:
Please confirm the remote controller and the collar are from the same packaging product.
Please make sure the batteries have enough electricity. If the distance between the remote controller and the receiver is too short, less than one meter, the product may not work properly.
Dog is our intimate partner and loyal friend , so please treat your dog well.
Multi-Functional
SMALL/MEDIUM/BIG STUBBORN DOGREMOTE TRAINING COLLAR
Solution to Dogs out of Control
Do you have trouble with the control of your dog? This is the most effective training system exactly for you. This multi-functional training collar is a combination of:
Vibration + 6-Level Shock
!! New Generation STRONGand POWERFUL!!
This training system is specifically designed for hard to train, stubborn dogs. You know some dogs are not sensitive to other kinds of training signals. If you want to get your dog's attention, this is the solution. It's fit for small/medium/large size dogas long as your dog's neck suitsthe adjustable collar length.
Included with your purchase is our guaranty that you will be happy, or your money back. The product comes with a 30-day warranty which is backed by excellent customer service so you can be sure that your satisfaction is guaranteed. See Return and Warranty for details.
Also See Our Other Dog Training Systems on Sale:
(5 in 1) 450 m Remote Dog Training System: 450 m working distance; 10 levels of vibration, ultrasonic and shock; automatic anti-bark; etc.
(4 in 1) 200 m Multi-Functional Remote Dog Training Collar: 200 m working distance; vibartion, shock, whistle and LED light; etc.
2-dog Multi-Functional Small/Medium/Big STUBBORN DOG REMOTE TRAINING COLLAR: Vibration plus 3 levels of shock;
Automatic Anti-Bark Dog Training Shock Collar: 5 levels of self-adjusting corrections.
Small/Medium Dog Automatic Anti-Barking Training Collar: Adjust allowable barking degree to suit individual dog; extra light collar, etc.
6 pcs GP 6V 4LR44 Battery for Dog Training Collars
and more …
Features
· The six levels of different static impulse and the vibration can adapt to the needs of different situations. It is safe for the pet.
· The conductive rubber electrode is soft and the static impulse can penetrate the hair of the pet. It is comfortable for the pet to wear.
· The strongest static impulse can quickly and effectively curb the improper deeds of the pet.
· The vibration call can help the master communicate with the pet gently.It will let your pet associate the vibration with static impulse. At the end, vibration will achieve the same effect as the static impulse.
· Power-saving modeof receiverprolongsthe life of the battery.
· The soft remote controller antenna is anti-broken.
· Adjustable collar length (from 20 cm to 50 cm) fits different size of dogs.
Product Specifications
- Collar
Length: 60mm Height: 30mm Width: 35mm.
Weight 70 g (with battery)
Collar length: adjustable from 20 cm (8”) to 50 cm (20”)
Power: One 6V 4LR44 camera battery (One start-up battery is included).
- Handset
Length: 120mm Height: 25mm Width: 45mm.
Weight: 100g (with battery)
Power: 9V battery
Package Included
- Multi-function training collar device X 1
- Remote control unit X 1
- Adjustable snap-on/off collar with D ring for lead attachment
- Collar testing unit (Clips to collar and lights up to tell you the shock action is operating)
- Operating Instructions X 1
|
|
|
|
| Select Image |
 |
|
|
|
|
|
|
|
|
|
|
